The product has been exposed to performance conditions beyond what our office was informed. 10 years on our 3 coat paint and stain finish.Paint or stain finish should be maintained as per our maintenance guidelines.Ī warranty claim may be rejected if : The product has been damaged due to improper storage, installation, use or maintenance. 10 years on ironmongery.The hardware must be maintained as per our maintenance guidelines. offer the following warranties as standard on their products : 30 years against rot and fungal attack on windows.Unfinished products are not included.10 years against failure of the seal on factory fitted double glazed units.10 years against manufacturing defects. The Workplace (Health, Safety and Welfare) Regulations 1992 state " Where a ladder over 6 metres long will be needed, suitable points for tying or fixing the ladder should be provided.Click here to download our quality maintenance document.īlairs Aluminium Ltd. Once re-certification is completed the client Is issued with the necessary certification and the Safesite database is updated accordingly. The eyebolt is then tested in tension to 6101 for 15 seconds by a competent person, Through fix eyebolts require the same examination, the eyebolt is then reinserted and the back nut torqued to 35Nm. The re-certification procedure entails the removal of the eyebolt for visual inspection purposes to check for deterioration, re-Insertion of the eyebolt together with a new identification tag providing the installation and re-testing dates. Safesite Eyebolts are statically tested to 12kN and available in standard galvanised finish to BS EN ISO 1461 :1999 or Polyester White Gloss to 85 5496 amended 1992 and BS 6497 amended 1992 or stainless steel 316 grade. The gives structure must be of adequate construction to be able to sustain the likely imposed loads, this to be confirmed by a qualified Engineer. Safesite Eyebolts are installed and comply with the recommendations of BS EN 796 1997 and BS 7883 : 2005. General guidance concerning reach limits and cleaning is provided within BS 8213: Part 1 : 2004 Windows doors and rooflights Installation The lanyard is then connected to the full body harness being worn by the operative. In these Instances one may specify eyebolts in order to provide a Class Al anchorage point to which a shock absorbing lanyard can be attached. ApplicationĬleaning windows may expose the window cleaner to potential fall risks. In these cases, eyebolts, roof anchors and ladder restraints are the most common and user friendly solution to ensuring operative fall arrest safety. External works often require access from the inside of a premises as well as from the outside, for example, window cleaning or minor maintenance operations. Clearview offers Eye-Bolt Installation and Maintenance as part of our portfolio of commercial services.
0 kommentar(er)
